Intermediate curing
Gel or partially cure the coating before a subsequent finishing operation.
APL / 08
APPLICATION-LED ENGINEERING01 / 01
Wood finishing
Single Lamp UV Curing System
Prepare the coating for its next layer.
Single lamp curing for UV coated materials.
Configured around your material, process and production needs.
- Lamp arrangement
- Single UV lamp
- Primary role
- Gelling / partial cure
- Handling
- Conveyor
The technology, explained
Prepare the coating for its next layer.
01 — OVERVIEWThis single-lamp UV conveyor is positioned for partial curing or gelling between coating stages. APL describes it as a system for preparing a coating for the next process, rather than treating every application as a final full-cure stage.
The reference machine includes a UV lamp, blower and conveyor motor. The correct UV exposure depends on the coating and the condition required before the next layer, so line speed and lamp settings should be established for the intended process.
Inside the machine
Designed around
the details.
Explore the capabilities that shape this machine’s role on your production floor.
Conveyor processing
Move coated material beneath the UV source as part of a continuous line.
Blower assembly
A blower is listed as part of the reference system.
Process matching
Confirm the required cure state and compatible coating with APL before setting exposure conditions.
Product configuration
| Configuration detail | Published product profile |
|---|---|
| Lamp arrangement | Single UV lamp |
| Primary role | Gelling / partial cure |
| Handling | Conveyor |
Published output figures refer to reference configurations. Actual results depend on material, artwork, process settings and selected options.
THE MATERIAL IS THE STARTING POINTApplication possibilities
Where this
technology fits.
- Intermediate coating cure
- Wood finishing lines
- Multi-stage UV coating
Material study shown for illustration. Discuss the actual substrate and intended finish with APL.
Plan your next step
A better brief.
A better fit.
Bring these details to your first conversation with the APL team.
- 01Board dimensions, thickness and handling method
- 02Coating or adhesive system and target surface finish
- 03Line speed, transfer height and available floor space
Continue exploring
Related technology.
Wood finishing
Automatic Board Feeder
Automated board feeding for connected wood finishing lines.
Explore machine
Wood finishing
Dust Remover
Remove surface dust before coating and finishing.
Explore machine
Wood finishing
Single Station Roller Coater
Controlled roller coating for wood and rigid flat surfaces.
Explore machine